The Tech Is Finally Good Enough for an Airship Revival

LTA Research’s Pathfinder 1 aims to solve humanitarian-relief and supply-chain bottlenecks

4 min read
People are arranged around the rear end of a white, cylindrical airship above a white floor and inside of a large aircraft hanger.

LTA Research staff maneuver Pathfinder 1 while the airship is under construction at the company’s Moffett Field facility, near San Francisco.

LTA Research

At Moffett Field in Mountain View, Calif., Lighter Than Air (LTA) Research is floating a new approach to a technology that saw its rise and fall a century ago: airships. Although airships have long since been supplanted by planes, LTA, which was founded in 2015 by CEO Alan Weston, believes that through a combination of new materials, better construction techniques, and technological advancements, airships are poised to—not reclaim the skies, certainly—but find a new niche.

Although airships never died off entirely—the Goodyear blimps, familiar to sports fans, are proof of that—the industry was already in decline by 1937, the year of the Hindenburg disaster. By the end of World War II, airships couldn’t compete with the speed airplanes offered, and they required larger crews. Today, what airships still linger serve primarily for advertising and sightseeing.


This article is part of our special report Top Tech 2023.

LTA’s Pathfinder 1 carries bigger dreams than hovering over a sports stadium, however. The company sees a natural fit for airships in humanitarian and relief missions. Airships can stay aloft for long periods of time, in case ground conditions aren’t ideal, have a long range, and carry significant payloads, according to Carl Taussig, LTA’s chief technical officer.

Pathfinder’s cigar-shaped envelope is just over 120 meters in length and 20 meters in diameter. While that dwarfs Goodyear’s current, 75-meter Wingfoot One, it’s still only half the length of the Hindenburg. LTA expects Pathfinder 1 to carry approximately 4 tonnes of cargo, in addition to its crew, water ballast, and fuel. The airship will have a top speed of 65 knots, or about 120 kilometers per hour—on par with the Hindenburg—with a sustained cruise speed of 35 to 40 knots (65 to 75 km/h).

Some 21st-century Airship Tech

It may not seem much of an advance to be building an airship that flies no faster than the Hindenburg. But Pathfinder 1 carries a lot of new tech that LTA is betting will prove key to an airship resurgence.

For one, airships used to be constructed around riveted aluminum girders, which provided the highest strength-to-weight ratio available at the time. Instead, LTA will be using carbon-fiber tubes attached to titanium hubs. As a result, Pathfinder 1’s primary structure will be both stronger and lighter.

Pathfinder 1’s outer covering is also a step up from past generations. Airships like the 1930s’ Graf Zeppelin had coverings made out of doped cotton canvas. The dope painted on the fabric increased its strength and resiliency. But canvas is still canvas. LTA has instead built its outer coverings out of a three-layer laminate of synthetics. The outermost layer is DuPont’s Tedlar, which is a polyvinyl fluoride. The middle layer is a loose weave of fire-retardant aramid fibers. The inner layer is polyester. “It’s very similar to what’s used in a lot of racing sailboats,” says Taussig. “We needed to modify that material to make it fire resistant and change a little bit about its structural performance.”

A cylindrical white airship under construction in a large aircraft hanger.LTA Research

But neither the materials science nor the manufacturing advances will take primary credit for LTA’s looked-for success, according to Taussig—instead, it’s the introduction of electronics. “Everything’s electric on Pathfinder,” he says. “All the actuation, all the propulsion, all the actual power is all electrically generated. It’s a fully electric fly-by-wire aircraft, which is not something that was possible 80 years ago.” Pathfinder 1 has 12 electric motors for propulsion, as well as four tail fins with steering rudders controlled by its fly-by-wire system. (During initial test flights, the airship will be powered by two reciprocating aircraft engines).

There’s one other piece of equipment making an appearance on Pathfinder 1 that wasn’t available 80 years ago: lidar. Installed at the top of each of Pathfinder 1’s helium gas cells is an automotive-grade lidar. “The lidar can give us a point cloud showing the entire internal hull of that gas cell,” says Taussig, which can then be used to determine the gas cell’s volume accurately. In flight, the airship’s pilots can use that information, as well as data about the helium’s purity, pressure, and temperature, to better keep the craft pitched properly and to avoid extra stress on the internal structure during flight.

Although LTA’s initial focus is on humanitarian applications, there are other areas where airships might shine one day. “An airship is kind of a ‘tweener,’ in between sea cargo and air freight,” says Taussig. Being fully electric, Pathfinder 1 is also greener than traditional air- or sea-freight options.

After completing Pathfinder 1’s construction late in 2022, LTA plans to conduct a series of ground tests on each of the airship’s systems in the first part of 2023. Once the team is satisfied with those tests, they’ll move to tethered flight tests and finally untethered flight tests over San Francisco’s South Bay later in the year.

The company will also construct an approximately 180-meter-long airship, Pathfinder 3 at its Akron Airdock facility in Ohio. Pathfinder 3 won’t be ready to fly in 2023, but its development shows LTA’s aspirations for an airship renaissance is more than just hot air.

This article appears in the January 2023 print issue as “The Return of the Airship.”

Top Tech 2023

Top Tech 2023: A Special Report

Preview exciting technical developments for the coming year.

Can This Company Dominate Green Hydrogen?

Fortescue will need more electricity-generating capacity than France.

An Airship Resurgence

Pathfinder 1 could herald a new era for zeppelins

A New Way to Speed Up Computing

Blue microLEDs bring optical fiber to the processor.

The Personal-Use eVTOL Is (Almost) Here

Opener’s BlackFly is a pulp-fiction fever dream with wings.

Baidu Will Make an Autonomous EV

Its partnership with Geely aims at full self-driving mode.

China Builds New Breeder Reactors

The power plants could also make weapons-grade plutonium.

Economics Drives a Ray-Gun Resurgence

Lasers should be cheap enough to use against drones.

A Cryptocurrency for the Masses or a Universal ID?

What Worldcoin’s killer app will be is not yet clear.

IBM’s Quantum Leap

The company’s Condor chip will boast more than 1,000 qubits.

Arthritis Gets a Jolt

Vagus-nerve stimulation promises to help treat autoimmune disorders.

Smartphones Become Satphones

New satellites can connect directly to your phone.

Exascale Comes to Europe

The E.U.’s first exascale supercomputer will be built in Germany.

The Short List

A dozen more tech milestones to watch for in 2023.

The Conversation (7)
Stefan Tibus15 Jan, 2023
M

I do wonder why there is no reference to the Zeppelin NT (see https://en.wikipedia.org/wiki/Zeppelin_NT). Larger models were planned but never built.

Charles Prael13 Dec, 2022
INDV

They haven't been in Moffett's Hanger one since it was closed and stripped in 2012. Why are you using that photo, and what _else_ is massively out of date or inaccurate?

Ulf Kanne11 Dec, 2022
M

How about the problematic scarcity of Helium? Is this gas really the best choice or could a safe solution based on good old hydrogen be more promising?

1 Reply
A pair of hands holding a small handheld with a screen, mini joystick, and two buttons.

The original Pong arcade game weighed 68 kilograms. Now you can have an infinite number of Pong versions in your hand.

James Provost

There is currently a lot of interest in AI tools designed to help programmers write software. GitHub’s Copilot and Amazon’s CodeWhisperer apply deep-learning techniques originally developed for generating natural-language text by adapting it to generate source code. The idea is that programmers can use these tools as a kind of auto-complete on steroids, using prompts to produce chunks of code that developers can integrate into their software.

Looking at these tools, I wondered: Could we take the next step and take the human programmer out of the loop? Could a working program be written and deployed on demand with just the touch of a button?

Keep Reading ↓Show less

Fine-Tuning the Factory: Simulation App Helps Optimize Additive Manufacturing Facility

Additive manufacturing processes can provide rapid and customizable production of high-quality components

7 min read
Fine-Tuning the Factory: Simulation App Helps Optimize Additive Manufacturing Facility

An example of a part produced through the metal powder bed fusion process.

This sponsored article is brought to you by COMSOL.

History teaches that the Industrial Revolution began in England in the mid-18th century. While that era of sooty foundries and mills is long past, manufacturing remains essential — and challenging. One promising way to meet modern industrial challenges is by using additive manufacturing (AM) processes, such as powder bed fusion and other emerging techniques. To fulfill its promise of rapid, precise, and customizable production, AM demands more than just a retooling of factory equipment; it also calls for new approaches to factory operation and management.

Keep Reading ↓Show less
{"imageShortcodeIds":["32338242"]}