Accelerometers are everywhere. You’ve probably got at least one on your person right now. But today’s run-of-the-mill accelerometers—MEMS devices that measure a minute change in capacitance—just aren’t very sensitive. They’re built to fit into smartwatches and smaller things, and that small size hampers how well they can sense changes. Engineers in Florida have now come up with a new take on the accelerometer that is as much as 1 million times as sensitive as a typical smartphone accelerometer, and it maintains that sensitivity up to a car-crash-scale 100 gs.
That combination of high sensitivity and large dynamic range in a cube that’s just 3 millimeters on a side should make the new accelerometer particularly useful in things that move quickly in three-dimensions, such as military drones, microrobots, and self-guided projectiles, according its inventors.
Ordinary MEMS accelerometers are made up of a moveable plate and a stationary plate, oriented perpendicular to each dimension measured. Together, the plates form a capacitor. When the device accelerates, the moveable plate bends toward or away from the stationary plate, changing the capacitance. Because the plate can’t move far, the change in capacitance is pretty small. “This is why the sensitivity is extremely poor,” says Ezzat G. Bakhoum, associate professor at the University of West Florida, in Pensacola.
Bakhoum is an expert in supercapacitors (also called ultracapacitors). These are devices that, like a battery, store much more energy than a capacitor. Yet they can charge and discharge quickly, like a capacitor. So it was a natural move to try to make capacitive accelerometers “super.”
Supercapacitors replace the capacitor’s plates with a high surface-area material—carbon nanotubes in this case. Between the material is an electrolyte—tetraethylammonium tetrafluoroborate dissolved in propylene carbonate (an-off-the-shelf solution despite its impenetrable name). Supercapacitors store more energy because of the greater surface area and because charge is also stored in ions of the liquid.
Bakhoum and his team built a sort of three-dimensional supercapacitor to act as an accelerometer. They started with a millimeter scale box, the inner walls of which were carbon-nanotube-coated stainless steel. Inside the cube, they placed a drop of the electrolyte. Because nanotubes are hydrophobic they repelled the electrolyte, shaping it into a ball that barely contacts all six of the cube’s walls.
At rest, the capacitance across any pair of the walls is basically zero, because the electrolyte isn’t really even touching the nanotubes. But an acceleration in any direction will squash the electrolyte down, driving it into the nanotubes opposite the direction of the acceleration and into the nanotubes of neighboring walls as well. This basically forms supercapacitors between the walls. Measuring their individual capacitances, Bakhoum’s group found, gives an accurate measure of acceleration.
The device gives an accuracy of 75 nanofarads per g, compared to the femtofarads per g of typical capacitive accelerometers, according to Bakhoum.
His team reported its results in the latest issue of IEEE Transactions on Components, Packaging, and Manufacturing Technology.
Bakhoum says he’s discussed the work with industry interests considering commercializing the device. But for him, it’s time to move on to making other kinds of sensors “super.”