Build Your Own Professional-Grade Audio Amp on the Sort of Cheap

Get amazing stereo sound with 3e Audio’s Class-D amplifier board

6 min read

Photo: Randi Klett
Photo: Randi Klett

UPDATE—8 SEPT. 2023: Since this story ran in 2018—which itself was an update of another story on a similar topic from 2009—a number of the component providers we touted have either gone out of business or stopped stocking the items we described. However, hardcore audio do-it-yourselfers needn’t worry. The internet taketh away, but it giveth too. The central chip of the whole exercise of this story, Texas Instruments’ TPA3250, is still available, and still unsurpassed in the kind of quality audio it can pump out for a very reasonable price. And it’s available today in both finished amplifiers and at least one board aimed at DIYers.

The important question, though, is how many other bells and whistles do you want to shell out for? If you are looking to for the least expensive solution, then the Chinese e-commerce site AliExpress (at the time of this story update at least) offers a range of class-D audio amp boards for between US $4.47 and US $110. And the audio tech site 3e Audio offers a similarly competitively-priced offering, albeit based on TI’s TPA3255 chip, which has higher power but audio quality not quite on a par with the 3250. And an audio shop in the Philippines, Sylph Audio, has some very interesting boards for sale, including one based on the TPA3251 that permits full balanced operation. Such modules get a maker close to a complete class-D amp for about a C-note or less (sometimes substantially less).

For someone striving for ultrahigh performance and willing to shell out for it, there are a range of other options. Audio startup Orchard Audio provides their own Starkrimson-Ultra class-D amp board, based on gallium nitride (GaN) transistors, which provide higher performance for a higher price. As of this writing, it’s $1050.

If the object is “bang for the buck,” it’s impossible to beat the Dutch audio-component site Hypex Electronics, with a range of class-D options offering what their site calls “the crème de la crème of OEM Class-D amplifiers.” A complete kit based on Hypex’s legendary UcD modules is an absolute steal at €577.50.

These latter options can be pricier than buying a board and rolling your own, of course. But they offer essentially identical performance specs as, and cost far below, those of finished, high-end integrated amplifiers. These can run between $10,000 and $15,000. Or more. But if you’re reading this far into a story on building your own class-D, then we’re going to guess you may want to know more still about what it takes to build your own high-end class-D amp. In which case, then, do read on. —IEEE Spectrum

Original article from 31 Oct. 2018 follows:

Years ago I decided to see how little I needed to spend to build a high-end, audiophile quality, class-D amplifier. The answer, then, was US $523.43. I built a worthy little amp, and the article I wrote about it for IEEE Spectrum still attracts page views, and even sporadic emails from people asking where they can get the parts.

Sorry folks, the main components are long gone. So I’ve been steering people to excellent class-D amplifier kits from Class D Audio, DIY Class D, and Ghent Audio instead. But a couple of months ago I got the itch to see how much better I could do now, almost a decade later, with the same challenge. Part of my motivation was the annual Best Stereo Amps lists from gadget-review website The Master Switch. The lists are dominated by amps costing more than $1,000 (nine of them cost more than $2,000).

I’m a sucker for flashy audio gear. But really now, step away from the checkbook and get out your soldering iron. If you have basic soldering and machining skills—can you drill holes in sheet aluminum?—you can get high-end gear for a lot less.

In a nutshell, a class-D amplifier works by converting an analog signal into a varying train of square pulses of fixed amplitude. These pulses efficiently turn transistors on and off, and the transistor output is converted back into a louder analog signal. When I wrote my previous article, class-D audio was fairly new, and audiophiles were still arguing about whether class-D amps could sound as good as class-AB or class-A units.

Nobody is having those arguments anymore. There are many class-D amplifiers on the market now, and the best of these are dominating the upper reaches of the high end.

Designing and building a class-D amp from scratch is a laudable undertaking. Should you decide to go this route I salute you, and suggest you start with Cezar Chirila‘s excellent article on the All About Circuits website. But if your heart’s desire is maximum fidelity per unit cost, a better strategy is to carefully choose amplifier modules and other components from among the huge array of fine options that are readily available. That’s what I’ve done here. You’re welcome.

An audio amplifier has two basic components: a power supply and an amplifier circuit. For the amplifier circuit, I spent a couple of weeks researching and evaluating possibilities and settled on the EAUMT-0050-2-A class-D amplifier board from 3e Audio, in Shenzhen City, China. It’s based on Texas Instruments’ excellent TPA3250 amplifier chip, which competes well with class-D amplifiers made from discrete components.

The TPA3250 can drive 8-ohm or 4-ohm speakers and is 92 percent efficient, according to TI. It can accept balanced input signals (as commonly used in music studios and other professional settings), or single-ended ones (typical of consumer gear).

img

img

img

imgMusical Composition: The amplifier (top photo) uses XLR connectors (at left in the photo) for signal input, typical of professional audio gear. Inside, the main parts are a power transformer from AnTek Products Corp. (second from top), a rectifier board from Xkitz Electronics (third from top), and an amplifier module from 3e Audio (bottom) that is based on Texas Instruments’ TPA3250 chip.Photos: Randi Klett

Test results on 3e’s site claim its TPA3250-based board has a total harmonic distortion plus noise (THD+N) of 0.0025 percent at 20 watts into a 4-ohm load, for a 1-kilohertz signal. That’s ridiculously low. For comparison, the $2,199 class-D Peachtree Audio nova300, which The Master Switch declared “Best Overall” amp this year, claims a THD+N of 0.005 percent under the same conditions.

Take all this with a grain of salt, and understand that you cannot hear the difference between a THD+N of 0.0025 percent and one of 0.005 percent. The takeaway here is that a sound system consisting of an amplifier based on the 3e board—which costs $49—along with a good digital-to-analog converter and a preamp can give you sound that can hold its own against a high-end amp.

For a power supply, I recommend an unregulated, audio-grade power supply from Xkitz Electronics, model XAPS-500W ($30). Feed it with a 22-volt, 200-volt-ampere power transformer from AnTek Products Corp., model AS-2222 ($32). If you prefer a switching power supply over a linear one, an outstanding choice would be the SMPS300RS from Connex Electronic ($65, which includes the transformer). Or if you want a really low-cost option, there’s the HPOO rectifier board available from AliExpress for just $15. On the other end of the scale, there’s the Eltim PS-UN63RQ module, at €119. Shipping to the United States is another €81, so it’s not a good option for Americans. (IEEE members can access a complete parts list and additional construction tips for this project).

After finishing this amplifier, I connected it to a pair of 30-year-old, three-way Panasonic speakers, which I frequently use for testing. The sound that emerged from these speakers was so good I was actually startled by it. Over the years, I have listened to at least 15 different amplifiers through these speakers, including tube amps costing upwards of $1,200. None has had the astounding clearness of tone, and precise, detailed and yet fluid sound reproduction of the 3e module paired with the Xkitz power supply. Finding a sweet spot characterized by precision, tightness of bass response, and overall warmness of tone is something few amplifiers manage to achieve, in my experience. This is one of them.

The total cost? $259.01. That’s a little over half of what it cost me to build a similar, but lower-performing, amplifier 10 years ago. That new sum, by the way, includes $37.50 I spent having the chassis professionally powder coated. Unless you’re really good at painting aluminum, I don’t recommend omitting this step. A high-end amp should look the part. But maybe that’s an argument for another day.

This article appears in the November 2018 print issue as “DIY Pro Audio.”

This article is for IEEE members only. Join IEEE to access our full archive.

Join the world’s largest professional organization devoted to engineering and applied sciences and get access to all of Spectrum’s articles, podcasts, and special reports. Learn more →

If you're already an IEEE member, please sign in to continue reading.

Membership includes:

  • Get unlimited access to IEEE Spectrum content
  • Follow your favorite topics to create a personalized feed of IEEE Spectrum content
  • Save Spectrum articles to read later
  • Network with other technology professionals
  • Establish a professional profile
  • Create a group to share and collaborate on projects
  • Discover IEEE events and activities
  • Join and participate in discussions