The Wuxi-based machine can perform the Linpack Benchmark—a long-standing arbiter of supercomputer prowess—at a rate of 93 petaflops, or 93 quadrillion floating-point operations per second. This performance is more than twice that of the previous record holder, China’s Tianhe-2. What’s more, TaihuLight achieves this capacity while consuming 2.4 megawatts less power than Tianhe-2.
Such efficiency gains are important if supercomputer designers hope to reach exascale operation, somewhere in the realm of 1,000 Pflops. Computers with that capability could be a boon for advanced manufacturing and national security, among many other applications. China, Europe, Japan, and the United States are all pushing toward the exascale range. Some countries are reportedly setting their sights on doing so by 2020; the United States is targeting the early 2020s. But two questions loom over those efforts: How capable will those computers be? And can we make them energy efficient enough to be economical?
We can get to the exascale now “if you’re willing to pay the power bill,” says Peter Kogge, a professor at the University of Notre Dame. Scaling up a supercomputer with today’s technology to create one that is 10 times as big would demand at least 10 times as much power, Kogge explains. And the difference between 20 MW and 200 MW, he says, “is the difference [between having] a substation or a nuclear power plant next to you.”
Kogge, who led a 2008 study on reaching the exascale, is updating power projections to cover the three categories of supercomputers built today: those with “heavyweight” high-performance CPUs; those that use “lightweight” microprocessors that are slower but cooler, and so can be packed more densely; and those that take advantage of graphics processing units to accelerate computation.
TaihuLight follows the lightweight approach, and it has made some sacrifices in pursuit of energy efficiency. Based on its hardware specs, TaihuLight can, in theory, crunch numbers at a rate of 125 Pflops. The machine reaches 74 percent of this peak theoretical capacity when running Linpack. But it does not fare as well on a new alternative benchmark, High Performance Conjugate Gradients (HPCG), which is designed to reflect how well a computer can perform more memory- and communications-intensive, real-world applications. When it runs HPCG, TaihuLight utilizes just 0.3 percent of its theoretical peak abilities, which means that only 3 out of every 1,000 possible floating-point operations are actually used by the computer. By comparison, Tianhe-2 and the United States’ Titan, the second- and third-fastest supercomputers in the Top500 rankings, respectively, can take advantage of just over 1 percent of their computing capacity. Japan’s K computer, currently ranked fifth on the list, achieved 4.9 percent with the HPCG metric.
“Everything is a balancing act,” says Jack Dongarra, a professor at the University of Tennessee, Knoxville, and one of the organizers of the Top500. “They produced a processor that can deliver high arithmetic performance but is very weak in terms of data movement.” But he notes that the TaihuLight team has developed applications that take advantage of the architecture; he says that three projects that were finalists for this year’s ACM Gordon Bell Prize, a prestigious supercomputing award, were designed to run on the machine.
TaihuLight uses DDR3, an older, slower memory, to save on power. Its architecture also uses small amounts of local memory near each core instead of a more traditional memory hierarchy, explains John Goodacre, a professor of computer architectures at the University of Manchester, in England. He says that while today’s applications can execute between 1 and 10 floating-point operations for every byte of main memory accessed, that ratio needs to be far higher for applications to run efficiently on TaihuLight. The design cuts down on a big expense in a supercomputer’s power budget: the amount of energy consumed shuttling data back and forth.
“I think what they’ve done is build a machine that changes some of the design rules that people have assumed are part of the requirements” for moving toward the exascale, Goodacre says. Further progress will depend, as the TaihuLight team has shown, on end-to-end design, he says. That includes looking not only at changes to hardware—a number of experts point to 3D stacking of logic and memory—but also to the fundamental programming paradigms we use to take advantage of the machines.
This article appears in the August 2016 print issue as “China Inches Toward the Exascale.”