Simulation-Driven Motor Design for Vehicle Electrification
This webinar will focus on the FEA component of evaluating a three-phase electric motor. You will get a live demonstration of setting up a parameterized model in COMSOL Multiphysics® of a nonlinear-surface permanent magnet synchronous motor (PMSM).
Model Based Development of Mechatronics & IoT Systems
Learn how next generation math and system design products can be applied right from concept studies, control design, multi-domain system performance optimization to controller implementation & testing.
Power Components for Battery Applications
Today, many systems from electric vehicles and home energy storage to communications infrastructure, use batteries to enable portable power or provide a fall back in the event that mains power fails.
Hardware-in-the-Loop Testing for High-Performance Battery Management Systems
This session will present an open systems architecture approach to HIL test systems implementation using commercial off-the-shelf hardware and software.
Inertial Solutions in Autonomous Ground Reference Systems
29 March 2017 Join AutonomouStuff, KVH and NovAtel for a webinar focusing on the Automated Research Development Platforms
Understanding Stimulated Brillouin Scattering with a Multiphysics Approach in COMSOL®
If you are interested in learning how to model stimulated Brillouin scattering (SBS) in COMSOL Multiphysics®, then tune into this webinar
IEEE 802.11ax: Wireless Networking in High-density WLANs
This webinar will address the open challenges that high-density WLANs must overcome to achieve high spatial reuse and spectrum efficiency.
Medical Devices: Making The Right Choice – Your Case For Quality
You will learn how Fresenius addresses the case for quality to improve their competitiveness and profitability and how they develop products to adhere to FDA and global regulations.
Model-Based Systems Engineering in Real Life
Model-Based Systems Engineering (MBSE) provides significant opportunities for improved productivity and quality.
Big-Data Analysis for Manufacturing Test
This webinar explores the benefits of proactively organizing and analyzing test data, so that potential problems can be mitigated before they hurt your business.
From 3-ring Binders to BOM: Lifetime Product's Step by Step Journey to Enterprise PLM
See how Lifetime Products evolved from using 3-ring binders to developing a comprehensive PLM strategy with a complete bill of materials.
SERDES Design & Verification Challenges
This presentation highlights the challenges, best practices, and simulation results involved with a 28nm, 4-lane, 250Mb/s to 12.7Gb/s SERDES design using the Analog FastSPICE (AFS) Platform.
Getting Ahead with Antenna Design – A Real-Time Location Tracking System
In this talk we will explore how software tools such as Antenna Magus and CST STUDIO SUITE® can help develop realistic models for complex communication systems.
Getting Ahead with FilterDesigner 3D
In this webinar FilterDesigner 3D will be presented in an online demo, where we will highlight the different features and functionalities
Getting Ahead with the Interference Task
In this webinar we will present all steps necessary to perform the simulation of RF interference and explain the concepts behind the new CST® interference task.
Getting Ahead with Broadband Macromodeling
This webinar will show how the state-of-the-art macromodeling software IdEM provides the ideal tool to verify the physical self-consistency of S-parameter data.
Getting Ahead with RF Breakdown Simulation for Space Hardware
In this webinar we will review the RF Breakdown effects which can occur in space hardware namely multipactor discharge.
Designing Medical Devices with Multiphysics Analysis
Learn how to analyze your medical device designs in COMSOL Multiphysics® by tuning into this webinar.
Semantic Interoperability for Smart Machines with OPC UA
Learn how to quickly connect NI's embedded control and monitoring systems to third party automation components via OPC UA
Innovation in Transformers: Alternative Fluids on the Rise
7 December 2016 The webinar focuses on the main regulations and characteristics of esters in comparison to conventional mineral oil. The benefits that apply to alternative fluids, like eco-footprint, safety, space limitations and performance will be presented on the basis of several use cases. Technological aspects will be covered as well as operational experiences.
Sensor Fusion: Potential, Challenges, and Applications
6 December 2016 This webinar will examine the potential of sensor fusion, applications to aerial and mobile mapping, major challenges, and their design solutions.
Simulating Acoustics in Transducers, Mobile Devices, and Hearing Aids
15 December 2016 In this presentation we will demonstrate modeling small devices such as miniature loudspeakers, microphones, hearing aids, and mobile devices using COMSOL Multiphysics®.
Coreless Packaging Technology for Compact, High-Performance Mobile Devices
20 December 2016 During this webinar we analyze SI/PI performance of two test vehicles, one a standard thick core symmetric design and the other a coreless substrate, and demonstrate how design optimization through asymmetry in the substrate thickness direction along with mechanical/thermal treatment and low CTE material usage can improve thermal warpage issues.
15 December 2016 In this webinar we will show how radomes can be tackled through electromagnetic simulation. We will introduce the topic with a range of applications, discuss the figures-of-merit for robust designs and focus on examples that illustrate how the Complete Technology of CST STUDIO SUITE can be used to achieve an optimal radome design.
Accurate simulations of Multistage Axial VIRCATORS operating in S-Band using CST PARTICLE STUDIO®
8 December 2016 The webinar will propose new VIRCATOR structures with reflectors embedded in the output circular waveguide in order to increase the output power. To predict a robust design for an experimental setup, the environment influence is discussed in terms of losses which can affect the operating frequencies and thus the output power.