Sony's Super Slo-Mo Cellphone Camera

Sony packs a super slo-mo camera into a cellphone
Photo: Sony Mobile Communications Inc.

This past summer, Sony debuted a high end cellphone, the Xperia XZ, that can take slow-motion videos at frame rates over an order of magnitude faster than its competitors’ handsets. The phone’s camera can capture the flapping of birds’ wings or a skateboard trick at a rate of 960 frames per second. By contrast, the iPhone X offers a maximum of 60 frames per second at 4K (ultra-high definition); the Samsung Galaxy S8 offers half that frame rate at 4K, and up to 60 fps when recording in high definition.

This week, at the International Electron Devices Meeting in San Francisco, Sony presented details about how it made this speedy camera work within the space and power constraints of a cellphone. The key is an unusual 3D-stacked design that sandwiches a layer of DRAM between a CMOS image sensor and a layer of logic.

Camera speeds are typically limited by the time it takes to transfer data off of individual pixels, says Hidenobu Tsugawa, an engineer at Sony Semiconductor Solutions in Kanagawa, Japan. The pixel’s bucket has to be emptied before it can be filled again, and slow transfer off the imaging chip slows that process down. To make higher frame rate cameras and cut down on distortion in fast moving images, makers of chips for high end SLRs can empty each pixel’s bucket faster by building memory elements within the pixels themselves. In cellphones, space is at a premium; large, memory-enabled pixels would take up too much valuable mobile real estate.

The super slo-mo image sensor addresses this problem by building up rather than out. The 19.3-million-pixel image sensing chip, a logic layer, and a layer comprising 1 gigabit of DRAM are fabricated on separate wafers, then bonded together, thinned, and connected through interlayer links called through-silicon vias. At about 130 micrometers thick, this stacked sensor is still small enough for a cellphone—and according to Sony, has the same footprint as its usual image sensing chips.

Instead of passing from pixels to logic and then to off-chip storage through a slow interface, image data empties directly from the pixel array into the DRAM layer before passing through a layer of logic and then off the chip. This arrangement makes the speed of the image sensor the only constraint, and fast-moving images are less prone to distortion, says Tsugawa. He adds: “The motion quality is better because of the reading speed. The image quality is not as good as an SLR, but smartphone sensors are starting to improve in quality.”

Advertisement

Tech Talk

IEEE Spectrum’s general technology blog, featuring news, analysis, and opinions about engineering, consumer electronics, and technology and society, from the editorial staff and freelance contributors.

Newsletter Sign Up

Sign up for the Tech Alert newsletter and receive ground-breaking technology and science news from IEEE Spectrum every Thursday.

Advertisement