The February 2023 issue of IEEE Spectrum is here!

Close bar

Inkjet-Printed Flexible Memory Devices

New memory cells could find use in wearables and print-on-demand electronics

2 min read
Photo: Michael Kaiser
Photo: Michael Kaiser

Flexible, inkjet-printable memory cells could help pave the way for mass-produced printable electronics, researchers from Germany and Canada say.

The new memory cells combine the strengths of the two different kinds of memory technology that have long dominated the computer industry. One type, which includes hard disks and flash memory, is relatively slow at reading and writing data but is non-volatile, meaning that it saves its data even when it gets powered down. The other, random access memory (RAM), is fast but volatile, only maintaining its data while powered.

The new memory devices are a form of resistive RAM (ReRAM), which is both fast and non-volatile. All memory cells are switchable between on and off states that represent one bit of data, a zero or one. But for ReRAM devices, these states are defined by the resistance of the memory cell, says study lead author Bernard Huber, a physicist at the Munich University of Applied Sciences in Germany.

The scientists detailed their findings online in the 4 April edition of the journal Applied Physics Letters.

In the new study, Huber and his colleagues experimented with a kind of ReRAM known as conductive bridge RAM (CBRAM). These devices each possess a simple capacitor structure, with an insulator sandwiched between two conductive electrodes. When a voltage is applied to a CBRAM cell, a conductive metallic filament forms that connects its two electrodes, resulting in a low-resistance “on” state. When the opposite voltage is applied, this conductive bridge partially dissolves, switching the cell back to a high-resistance “off” state.

Previous work sought to develop ReRAM that was printable in order to lower production costs. However, until now, all ReRAM fabricated using standard inkjet printing required additional processing steps such as electroplating or lithography, Huber says.

The scientists created their memory cells using a standard FujiFilm Dimatix DMP 2831 inkjet printer. Three different inks were used to fabricate the devices: electrically conductive silver nanoparticles; electrically insulating spin-on-glass, which can get applied as a liquid and cured to form a layer of glass; and an electrically conductive polymer known as PEDOT:PSS.

The resulting memory cells could be printed on cheap, flexible plastic foils. In addition, the researchers note they are low power consumption devices, only needing 1 micro-amp of current to write data, 0.5 volts to switch on, and -0.05 volts to switch off. Moreover, they could switch on and off at speeds of up to 300 nanoseconds (3.33 megahertz). “Our tabletop inkjet approach provides comparable device performance as otherwise obtained with full-scale clean-room processes,” Huber says.

Furthermore, each of these memory cells is potentially multi-bit. Varying the strength of the voltage applied to each device can in turn vary the size and conductance of the metallic filament that forms in each memory cell. All in all, each device could possess eight distinguishable electronic states, or three bits, the researchers say.

The size of the memory cells is limited by the resolution of the inkjet printer used; the current prototypes are about 100 by 100 micrometers large. “Any improvement in printing technology instantaneously translates into further miniaturization,” Huber says.

Potential applications for these memory cells include “the up-and-coming fields of flexible devices and wearables,” Huber says. Another possibility is print-on-demand electronics. “Imagine supermarkets printing their own smart tags; customized metro-tickets; or home appliances for which you can download the circuit design from a database to your printer," Huber says.

The researchers are now exploring combining their printed memory cells with logic circuits. They also aim to create transparent printable circuits, Huber says.

The Conversation (0)

An IBM Quantum Computer Will Soon Pass the 1,000-Qubit Mark

The Condor processor is just one quantum-computing advance slated for 2023

4 min read
This photo shows a woman working on a piece of apparatus that is suspended from the ceiling of the laboratory.

A researcher at IBM’s Thomas J. Watson Research Center examines some of the quantum hardware being constructed there.

Connie Zhou/IBM

IBM’s Condor, the world’s first universal quantum computer with more than 1,000 qubits, is set to debut in 2023. The year is also expected to see IBM launch Heron, the first of a new flock of modular quantum processors that the company says may help it produce quantum computers with more than 4,000 qubits by 2025.

This article is part of our special report Top Tech 2023.

While quantum computers can, in theory, quickly find answers to problems that classical computers would take eons to solve, today’s quantum hardware is still short on qubits, limiting its usefulness. Entanglement and other quantum states necessary for quantum computation are infamously fragile, being susceptible to heat and other disturbances, which makes scaling up the number of qubits a huge technical challenge.

Keep Reading ↓Show less