Is This the End for Lithium-ion Batteries?

"Layer cake" anode could help sodium-ion batteries displace lithium-ion

2 min read

Four layers of silver balls and connected lines. In between are molecule symbols and three large green balls with black plus signs on them.

Researchers stacked specially designed graphene sheets with benzene molecules in between. This "layer cake" allows the sodium ions (in green) to efficiently store energy.

Marcus Folino and Yen Strandqvist/Chalmers University of Technology

After years of anticipation, sodium-ion batteries are starting to deliver on their promise for energy storage. But so far, their commercialization is limited to large-scale uses such as storing energy on the grid. Sodium-ion batteries just don't have the oomph needed for EVs and laptops. At about 285 Wh/kg, lithium-ion batteries have twice the energy density of sodium, making them more suitable for those portable applications.

Researchers now report a new type of graphene electrode that could boost the storage capacity of sodium batteries to rival lithium's. The material can pack nearly as many sodium ions by volume as a conventional graphite electrode does lithium. It opens up a path to making low-cost, compact sodium batteries practical.

Abundant and cheap, and with similar chemical properties as lithium, sodium is a promising replacement for lithium in next-generation batteries. The stability and safety of sodium batteries makes them especially promising for electronics and cars, where overheated lithium-ion batteries have sometimes proven hazardous.

"But currently the major problem with sodium-ion batteries is that we don't have a suitable anode material," says Jinhua Sun, a researcher in the department of industrial and materials science at Chalmers University of Technology.

For the battery to charge quickly and store a lot of energy, ions need to easily slip in and out of the anode material. Sodium-ion batteries use cathodes made of sodium metal oxides, while their anodes are typically carbon-based anodes just like their lithium cousins; although Santa Clara, California-based Natron Energy is making both its anodes and cathodes out of Prussian Blue pigment used in dyes and paints.

Some sodium battery developers are using activated carbon for the anode, which holds sodium ions in its pores. "But you need to use high-grade activated carbon, which is very expensive and not easy to produce," Sun says.

Graphite, which is the anode material in lithium-ion batteries, is a lower cost option. However, sodium ions do not move efficiently between the stack of graphene sheets that make up graphite. Researchers used to think this was because sodium ions are bigger than lithium ions, but turns out even-bigger potassium ions can move in and out easily in graphite, Sun says. "Now we think it's the surface chemistry of graphene layers and the electronic structure that cannot accommodate sodium ions."

He and his colleagues have come up with a new graphite-like material that overcomes these issues. To make it, they grow a single sheet of graphene on copper foil and attach a single layer of benzene molecules to its top surface. They grow many such graphene sheets and stack them to make a layer cake of graphene held apart by benzene molecules.

The benzene layer increases the spacing between the layers to allow sodium ions to enter and exit easily. They also create defects on the graphene surface that as as active reaction sites to adsorb the ions. Plus, benzene has chemical groups that bind strongly with sodium ions.

This seemingly simple strategy boosts the material's sodium ion-storing capacity drastically. The researchers' calculations show that the capacity matches that of graphite's capacity for lithium. Graphite's capacity for sodium ions is typically about 35 milliAmpere-hours per gram, but the new material can hold over 330 mAh/g, about the same as graphite's lithium-storing capacity.

The Conversation (1)
Ning-Cheng Lee
Ning-Cheng Lee13 Sep, 2021
F

The article uses mixed units for energy density (W-hr/kg & mA-hr/g) but does not list the cell voltage for each chemistry. This makes a comparing chemistries difficult.