Restoring Hearing With Beams of Light

Gene therapy and optoelectronics could radically upgrade hearing for millions of people

13 min read
A computer graphic shows a gray structure that’s curled like a snail’s shell. A big purple line runs through it. Many clusters of smaller red lines are scattered throughout the curled structure.

Human hearing depends on the cochlea, a snail-shaped structure in the inner ear. A new kind of cochlear implant for people with disabling hearing loss would use beams of light to stimulate the cochlear nerve.

Lakshay Khurana and Daniel Keppeler
Blue

There’s a popular misconception that cochlear implants restore natural hearing. In fact, these marvels of engineering give people a new kind of “electric hearing” that they must learn how to use.

Natural hearing results from vibrations hitting tiny structures called hair cells within the cochlea in the inner ear. A cochlear implant bypasses the damaged or dysfunctional parts of the ear and uses electrodes to directly stimulate the cochlear nerve, which sends signals to the brain. When my hearing-impaired patients have their cochlear implants turned on for the first time, they often report that voices sound flat and robotic and that background noises blur together and drown out voices. Although users can have many sessions with technicians to “tune” and adjust their implants’ settings to make sounds more pleasant and helpful, there’s a limit to what can be achieved with today’s technology.

I have been an otolaryngologist for more than two decades. My patients tell me they want more natural sound, more enjoyment of music, and most of all, better comprehension of speech, particularly in settings with background noise—the so-called cocktail party problem. For 15 years, my team at the University of Göttingen, in Germany, has been collaborating with colleagues at the University of Freiburg and beyond to reinvent the cochlear implant in a strikingly counterintuitive way: using light.

We recognize that today’s cochlear implants run up against hard limits of engineering and human physiology. So we’re developing a new kind of cochlear implant that uses light emitters and genetically altered cells that respond to light. By using precise beams of light instead of electrical current to stimulate the cochlear nerve, we expect our optical cochlear implants to better replicate the full spectral nature of sounds and better mimic natural hearing. We aim to start clinical trials in 2026 and, if all goes well, we could get regulatory approval for our device at the beginning of the next decade. Then, people all over the world could begin to hear the light.

Three 3D microscopic images show bony structures in gray, cells in glowing blue spirals, and an implant as a thin and twisting dotted line.These 3D microscopic images of mouse ear anatomy show optical implants [dotted lines] twisting through the intricate structure of a normal cochlea, which contains hair cells; in deafness, these cells are lost or damaged. At left, the hair cells [light blue spiral] connect to the cochlear nerve cells [blue filaments and dots]. In the middle and right images, the bony housing of the mouse cochlea surrounds this delicate arrangement.Daniel Keppeler

How cochlear implants work

Some 466 million people worldwide suffer from disabling hearing loss that requires intervention, according to the World Health Organization. Hearing loss mainly results from damage to the cochlea caused by disease, noise, or age and, so far, there is no cure. Hearing can be partially restored by hearing aids, which essentially provide an amplified version of the sound to the remaining sensory hair cells of the cochlea. Profoundly hearing-impaired people benefit more from cochlear implants, which, as mentioned above, skip over dysfunctional or lost hair cells and directly stimulate the cochlear, or auditory, nerve.

In the 2030s, people all over the world could begin to hear the light.

Today’s cochlear implants are the most successful neuroprosthetic to date. The first device was approved by the U.S. Food and Drug Administration in the 1980s, and nearly 737,000 devices had been implanted globally by 2019. Yet they make limited use of the neurons available for sound encoding in the cochlea. To understand why, you first need to understand how natural hearing works.

In a functioning human ear, sound waves are channeled down the ear canal and set the ear drum in motion, which in turn vibrates tiny bones in the middle ear. Those bones transfer the vibrations to the inner ear’s cochlea, a snail-shaped structure about the size of a pea. Inside the fluid-filled cochlea, a membrane ripples in response to sound vibrations, and those ripples move bundles of sensory hair cells that project from the surface of that membrane. These movements trigger the hair cells to release neurotransmitters that cause an electrical signal in the neurons of the cochlear nerve. All these electrical signals encode the sound, and the signal travels up the nerve to the brain. Regardless of which sound frequency they encode, the cochlear neurons represent sound intensity by the rate and timing of their electrical signals: The firing rate can reach a few hundred hertz, and the timing can achieve submillisecond precision.

Hair cells in different parts of the cochlea respond to different frequencies of sound, with those at the base of the spiral-shaped cochlea detecting high-pitched sounds of up to about 20 kilohertz, and those at the top of the spiral detecting low-pitched sounds down to about 20 Hz. This frequency map of the cochlea is also available at the level of the neurons, which can be thought of as a spiraling array of receivers. Cochlear implants capitalize on this structure, stimulating neurons in the base of the cochlea to create the perception of a high pitch, and so on.

A commercial cochlear implant today has a microphone, processor, and transmitter that are worn on the head, as well as a receiver and electrodes that are implanted. It typically has between 12 and 24 electrodes that are inserted into the cochlea to directly stimulate the nerve at different points. But the saline fluid within the cochlea is conductive, so the current from each electrode spreads out and causes broad activation of neurons across the frequency map of the cochlea. Because the frequency selectivity of electrical stimulation is limited, the quality of artificial hearing is limited, too. The natural process of hearing, in which hair cells trigger precise points on the cochlear nerve, can be thought of as playing the piano with your fingers; cochlear implants are more equivalent to playing with your fists. Even worse, this large stimulation overlap limits the way we can stimulate the auditory nerve, as it forces us to activate only one electrode at a time.

Three Ways to Hear

A diagram with three parts shows the differences between normal hearing, electrical cochlear implant, and optical cochlear implant. Each shows the anatomy of the middle and inner ear, including the spiral shaped cochlea.Chris Philpot

In normal hearing, sound waves travel down the ear canal and vibrate the ear drum and tiny bones in the middle ear. Those vibrations then reach the spiral-shaped cochlea and move bundles of sensory hair cells. When the hair cells respond, it triggers a neural signal that travels up the cochlear nerve to the brain. Hair cells at the base of the spiral respond to high-pitched sounds; those at the tip respond to low-pitched sounds.

With an electrical cochlear implant, a microphone, processor, and transmitter are worn behind the ear. The processor translates a sound’s pattern of frequencies into a crude stimulation pattern, which is transmitted to an implanted receiver and then to an electrode array that spirals through the cochlea. A limited number of electrodes (12 are shown here) directly stimulate the cells of the cochlear nerve. But each electrical pulse spreads out and stimulates off-target nerve cells, which results in muddier sound.

In a future optical cochlear implant, the external hardware could remain the same, though the processor could break up the sound into narrower frequency bands and transmit a more sophisticated stimulation pattern. The light source, either a flexible micro-LED array or optical fibers, would spiral through the cochlea, and the implant could have many more stimulation sites, because light is more easily confined in space than electrical current is. The user would have a gene-therapy treatment to make the cells of the cochlear nerve responsive to light, which would trigger precise signals that travel up the nerve to the brain.

How optogenetics works

The idea for a better way began back in 2005, when I started hearing about a new technique being pioneered in neuroscience called optogenetics. German researchers were among the first to discover light-sensitive proteins in algae that regulated the flow of ions across a cellular membrane. Then, other research groups began experimenting with taking the genes that coded for such proteins and using a harmless viral vector to insert them into neurons. The upshot was that shining a light on these genetically altered neurons could trigger them to open their voltage-gated ion channels and thus fire, or activate, allowing researchers to directly control living animals’ brains and behaviors. Since then, optogenetics has become a significant tool in neuroscience research, and clinicians are experimenting with medical applications including vision restoration and cardiac pacing.

I’ve long been interested in how sound is encoded and how this coding goes wrong in hearing impairment. It occurred to me that stimulating the cochlear nerve with light instead of electricity could provide much more precise control, because light can be tightly focused even in the cochlea’s saline environment.

We are proposing a new type of implanted medical device that will be paired with a new type of gene therapy.

If we used optogenetics to make cochlear nerve cells light sensitive, we could then precisely hit these targets with beams of low-energy light to produce much finer auditory sensations than with the electrical implant. We could theoretically have more than five times as many targets spaced throughout the cochlea, perhaps as many as 64 or 128. Sound stimuli could be electronically split up into many more discrete frequency bands, giving users a much richer experience of sound. This general idea had been taken up earlier by Claus-Peter Richter from Northwestern University, who proposed directly stimulating the auditory nerve with high-energy infrared light, though that concept wasn’t confirmed by other laboratories.

Our idea was exciting, but my collaborators and I saw a host of challenges. We were proposing a new type of implanted medical device that would be paired with a new type of gene therapy, both of which must meet the highest safety standards. We’d need to determine the best light source to use in the optogenetic system and how to transmit it to the proper spots in the cochlea. We had to find the right light-sensitive protein to use in the cochlear nerve cells, and we had to figure out how best to deliver the genes that code for those proteins to the right parts of the cochlea.

But we’ve made great progress over the years. In 2015, the European Research Council gave us a vote of confidence when it funded our “OptoHear” project, and in 2019, we spun off a company called OptoGenTech to work toward commercializing our device.

Channelrhodopsins, micro-LEDs, and fiber optics

Our early proof-of-concept experiments in mice explored both the biology and technology at play in our mission. Finding the right light-sensitive protein, or channelrhodopsin, turned out to be a long process. Many early efforts in optogenetics used channelrhodopsin-2 (ChR2) that opens an ion channel in response to blue light. We used it in a proof-of-concept experiment in mice that demonstrated that optogenetic stimulation of the auditory pathway provided better frequency selectivity than electrical stimulation did.

In our continued search for the best channelrhodopsin for our purpose, we tried a ChR2 variant called calcium translocating channelrhodopsin (CatCh) from the Max Planck Institute of Biophysics lab of Ernst Bamberg, one of the world pioneers of optogenetics. We delivered CatCh to the cochlear neurons of Mongolian gerbils using a harmless virus as a vector. We next trained the gerbils to respond to an auditory stimulus, teaching them to avoid a certain area when they heard a tone. Then we deafened the gerbils by applying a drug that kills hair cells and inserted a tiny optical cochlear implant to stimulate the light-sensitized cochlear neurons. The deaf animals responded to this light stimulation just as they had to the auditory stimulus.

The optical cochlear implant will enable people to pick out voices in a busy meeting and appreciate the subtleties of their favorite songs.

However, the use of CatCh has two problems: First, it requires blue light, which is associated with phototoxicity. When light, particularly high-energy blue light, shines directly on cells that are typically in the dark of the body’s interior, these cells can be damaged and eventually die off. The other problem with CatCh is that it’s slow to reset. At body temperature, once CatCh is activated by light, it takes about a dozen milliseconds to close the channel and be ready for the next activation. Such slow kinetics do not support the precise timing of neuron activation necessary to encode sound, which can require more than a hundred spikes per second. Many people said the kinetics of channelrhodopsins made our quest impossible—that even if we gained spectral resolution, we’d lose temporal resolution. But we took those doubts as a strong motivation to look for faster channelrhodopsins, and ones that respond to red light.

We were excited when a leader in optogenetics, Edward Boyden at MIT, discovered a faster-acting channelrhodopsin that his team called Chronos. Although it still required blue light for activation, Chronos was the fastest channelrhodopsin to date, taking about 3.6 milliseconds to close at room temperature. Even better, we found that it closed within about 1 ms at the warmer temperature of the body. However, it took some extra tricks to get Chronos working in the cochlea: We had to use powerful viral vectors and certain genetic sequences to improve the delivery of Chronos protein to the cell membrane of the cochlear neurons. With those tricks, both single neurons and the neural population responded robustly and with good temporal precision to optical stimulation at higher rates of up to about 250 Hz. So Chronos enabled us to elicit near-natural rates of neural firing, suggesting that we could have both frequency and time resolution. But we still needed to find an ultrafast channelrhodopsin that operated with longer wavelength light.

We teamed up with Bamberg to take on the challenge. The collaboration targeted Chrimson, a channelrhodopsin first described by Boyden that’s best stimulated by orange light. The first results of our engineering experiments with Chrimson were fast Chrimson (f-Chrimson) and very fast Chrimson (vf-Chrimson). We were pleased to discover that f-Chrimson enables cochlear neurons to respond to red light reliably up to stimulation rates of approximately 200 Hz. Vf-Chrimson is even faster but is less well expressed in the cells than f-Chrimson is; so far, vf-Chrimson has not shown a measurable advantage over f-Chrimson when it comes to high-frequency stimulation of cochlear neurons.

Two micrograph images each show a glass rod with a thin, flexible tape wrapped around it in a spiral. In the image at left, the tape is clear with tiny black squares all along its length. In the image at right, the squares are glowing with light blue light.   This flexible micro-LED array, fabricated at the University of Freiburg, is wrapped around a glass rod that’s 1 millimeter in diameter. The array is shown with its 144 diodes turned off [left] and operating at 1 milliamp [right]. University of Freiburg/Frontiers

We’ve also been exploring our options for the implanted light source that will trigger the optogenetic cells. The implant must be small enough to fit into the limited space of the cochlea, stiff enough for surgical insertion, yet flexible enough to gently follow the cochlea’s curvature. Its housing must be biocompatible, transparent, and robust enough to last for decades. My collaborators Ulrich Schwarz and Patrick Ruther, then at the University of Freiburg, started things off by developing the first micro-light-emitting diodes (micro-LEDs) for optical cochlear implants.

We found micro-LEDs useful because they’re a very mature commercial technology with good power efficiency. We conducted severalexperiments with microfabricated thin-film micro-LEDs and demonstrated that we could optogenetically stimulate the cochlear nerve in our targeted frequency ranges. But micro-LEDs have drawbacks. For one thing, it’s difficult to establish a flexible, transparent, and durable hermetic seal around the implanted micro-LEDs. Also, micro-LEDs with the highest efficiency emit blue light, which brings us back to the phototoxicity problem. That's why we’re also looking at another way forward.

Instead of getting the semiconductor emitter itself into the cochlea, the alternative approach puts the light source, such as a laser diode, farther away in a hermetically sealed titanium housing. Optical fibers then bring the light into the cochlea and to the light-sensitive neurons. The optical fibers must be biocompatible, durable, and flexible enough to wind through the cochlea, which may be challenging with typical glass fibers. There’s interesting ongoing research in flexible polymer fibers, which might have better mechanical characteristics, but so far, they haven’t matched glass in efficiency of light propagation. The fiber-optic approach could have efficiency drawbacks, because we’d lose some light when it goes from the laser diode to the fiber, when it travels down the fiber, and when it goes from the fiber to the cochlea. But the approach seems promising, as it ensures that the optoelectronic components could be safely sealed up and would likely make for an easy insertion of the flexible waveguide array.

Two micrograph images show thin black tubes of varying lengths with tips that glow with a reddish light. Another design possibility for optical cochlear implants is to use laser diodes as a light source and pair them with optical fibers made of a flexible polymer. The laser diode could be safely encapsulated outside the cochlea, which would reduce concerns about heat, while polymer waveguide arrays [left and right images] would curl into the cochlea to deliver the light to the cells.OptoGenTech

The road to clinical trials

As we consider assembling these components into a commercial medical device, we first look for parts of existing cochlear implants that we can adopt. The audio processors that work with today’s cochlear implants can be adapted to our purpose; we’ll just need to split up the signal into more channels with smaller frequency ranges. The external transmitter and implanted receiver also could be similar to existing technologies, which will make our regulatory pathway that much easier. But the truly novel parts of our system—the optical stimulator and the gene therapy to deliver the channelrhodopsins to the cochlea—will require a good amount of scrutiny.

Cochlear implant surgery is quite mature and typically takes only a couple of hours at most. To keep things simple, we want to keep our procedure as close as possible to existing surgeries. But the key part of the surgery will be quite different: Instead of inserting electrodes into the cochlea, surgeons will first administer viral vectors to deliver the genes for the channelrhodopsin to the cochlear nerve cells, and then implant the light emitter into the cochlea.

Hearing Upgrade

Today’s electrical cochlear implants divide rich sounds up into a small number of frequency bands and send the signals to a limited number of electrodes. Optical cochlear implants could have many more stimulation sites, meaning that sound could be divided into many more frequency bands.



Original


8 channels


64 channels

Since optogenetic therapies are just beginning to be tested in clinical trials, there’s still some uncertainty about how best to make the technique work in humans. We’re still thinking about how to get the viral vector to deliver the necessary genes to the correct neurons in the cochlea. The viral vector we’ve used in experiments thus far, an adeno-associated virus, is a harmless virus that has already been approved for use in several gene therapies, and we’re using some genetic tricks and local administration to target cochlear neurons specifically. We’ve already begun gathering data about the stability of the optogenetically altered cells and whether they’ll need repeated injections of the channelrhodopsin genes to stay responsive to light.

Our roadmap to clinical trials is very ambitious. We’re working now to finalize and freeze the design of the device, and we have ongoing preclinical studies in animals to check for phototoxicity and prove the efficacy of the basic idea. We aim to begin our first-in-human study in 2026, in which we’ll find the safest dose for the gene therapy. We hope to launch a large phase 3 clinical trial in 2028 to collect data that we’ll use in submitting the device for regulatory approval, which we could win in the early 2030s.

We foresee a future in which beams of light can bring rich soundscapes to people with profound hearing loss or deafness. We hope that the optical cochlear implant will enable them to pick out voices in a busy meeting, appreciate the subtleties of their favorite songs, and take in the full spectrum of sound—from trilling birdsongs to booming bass notes. We think this technology has the potential to illuminate their auditory worlds.

{"imageShortcodeIds":[]}
The Conversation (3)
Keith Kumm28 Jul, 2022
LM

Fascinating. Unclear how the "genetics" works - neurons don't regenerate, complicated, multi-process CRISPR probably ruled out nearterm, so possibly simple trans-wall mRNA? If so, endurance is a big question, just as in vaccines. Regarding the external DSP, modified DFT (mDFT) is chip-feasible, "channelizing" the pressure audio precisely with minimal overlap, and simultaneously in time and wavelength, supporting the idea of ultra-selective ON/OFF/pulsetrain stimuli to the disparate ion channels via some demultiplexer built into the optics. Multiple wavelength (WDM) optics might provide simultaneous, orthogonal transmission of overlapping pulsetrain channels to loci distributed across the optical cannula. This might involve annular layering or some reflection plane scheme, possibly interacting with multi-spectral wavelets cohering at differing propagation distances? Just a thought. On an entirely separate, but tightly related subject, tinnitus, is it possible that this same basic technology could be used to turn OFF (or otherwise defeat) neurochannels exciting this deleterious artifact of hearing loss? I think tinnitus could be as important an application regime as profound hearing loss, since so many more persons, and so often younger, suffer from it than from the near-total deafness that is associated with clinical cochlear implantation, applied particularly to elderly patients today. I would enjoy hearing from the author on these few ideas and questions. He and his team are to be complimented and encouraged for working on a very important problem in quality of life. I would like to listen (!) along for future developments here.

Doug Dulmage28 Jul, 2022
INDV

I am personally very interested in this! I'm a 40yr veteran of live audio production which I believe was the cause of a attack of Meniere's that took away most of the hearing in my right ear, along with perm. tinnitus in both ears. I do have random short term periods where I do get partial hearing back with no apparent triggers. I also have a background in lasers and electro-optics, specializing in acousto-optic modulators and deflectors which got me thinking about alternatives to your fiber optic "fan out" based on optical/acoustic channels. Perhaps a FM acousto-optic deflector for channel generation with a modulated laser diode source? The "refill" time of such a deflector would be in the microseconds per sweep with up to a thousand channels being reasonable. Or possibly a grating? And to top it off, my daughter is a Dr. of Genetics and Genomics, so this research is something that I have a personal interest in, to the point of wanting to participate! I would appreciate being informed of any trials, etc. Regards, Doug Dulmage, dulmage@shaw.ca

Aaron Minner27 Jul, 2022
INDV

First: excellent article. Then, not all of us cochlear implant users have "robotic" sound: mine gives me sound as I remember it before I lost my hearing in 1984, including the enjoyment of music. But that's with a Cochlear Spectra 22; my newer "upgrades" are awful, in comparison. Last, how would this implant be useful for someone who already has an implant? Would the original implant have to be removed?

Space 5G Is On the Launchpad

Standard handsets on Earth, in some locations, will soon connect directly to satellites for remote roaming

3 min read
A chamber with a gold apparatus with many structures coming off it.

Lynk Tower 1 launched in April 2022, deploying the world’s first commercial cell tower in space.

Lynk Global

The next generation of cellphone networks won’t just be 5G or 6G—they will be zero g. In April, Lynk Global launched the first direct-to-mobile commercial satellite, and on 15 August a competitor, AST SpaceMobile, confirmed plans to launch an experimental direct-to-mobile satellite of its own in mid-September. Inmarsat and other companies are working on their own low Earth orbit (LEO) cellular solutions as launch prices drop, satellite fabrication methods improve, and telecoms engineers push new network capabilities.

LEO satellite systems such as SpaceX’s Starlink and Amazon’s Kuiper envision huge constellations of satellites. However, the U.S. Federal Communications Commission just rejected SpaceX’s application for some of the US $9 billion federal rural broadband fund—in part because the Starlink system requires a $600 ground station. Space-based cell service would not require special equipment, making it a potential candidate for rural broadband funds if companies can develop solutions to the many challenges that face satellite-based smartphone service.

Keep Reading ↓Show less

20 Teams to Compete for $10M Telerobot XPrize

Robots will explore remote physical embodiment in the ANA Avatar XPrize Finals

8 min read
A woman in a VR headset holding motion controllers stands next to a humanoid robotic torso on a mobile base

Ideally, autonomous robots would be capable enough to do everything we wanted them to do, and lots of people are working very hard toward that goal. Annoyingly, though, humans are extremely capable, and with the exception of tasks that require a very specific combination of strength or speed or precision, having a human in the loop is still a good way of making sure that you get the job done. But the physical meat-sack nature of humans is annoying as well, restricting us to using our talents and (equally important) having physical experiences in only one location at a time.

The ANA Avatar XPrize seeks to solve this by combining humans and robots by enabling physical, nonautonomous avatar systems that allow remote users to see, hear, touch, and interact in real time. This isn’t a new idea, but with US $10 million up for grabs, this competition is the biggest push toward avatar robotics we’ve seen since the DARPA Robotics Challenge. And after a questionable start, the challenge evolved to (I would argue) better serve its purpose, with a final event coming up in November that will definitely be worth watching.

Keep Reading ↓Show less

Modeling Microfluidic Organ-on-a-Chip Devices

Register for this webinar to enhance your modeling and design processes for microfluidic organ-on-a-chip devices using COMSOL Multiphysics

1 min read
Comsol Logo
Comsol

If you want to enhance your modeling and design processes for microfluidic organ-on-a-chip devices, tune into this webinar.

You will learn methods for simulating the performance and behavior of microfluidic organ-on-a-chip devices and microphysiological systems in COMSOL Multiphysics. Additionally, you will see how to couple multiple physical effects in your model, including chemical transport, particle tracing, and fluid–structure interaction. You will also learn how to distill simulation output to find key design parameters and obtain a high-level description of system performance and behavior.

Keep Reading ↓Show less