The movement of data in a computer is almost the converse of the movement of traffic in a city. Downtown, in the congested core of the microprocessor, the bits fly at an extraordinary rate. But further out, on the broad avenues of copper that link one processor to another and one circuit board to the next, things slow down to a comparative crawl. A Pentium 4 introduced this spring operates at 2.4 GHz, but the data travels on a bus operating at only 400 MHz. The speed picks up again, though, out on the highways of the world's optical-fiber telecommunications networks. Obviously, the closer engineers can bring the optical superhighway to the microprocessor, the fewer copper bottlenecks can occur, as if you could pull out of your driveway straight onto the Autobahn.
So some researchers say that, within just a few years, many of the copper connections in computers will yield to high-speed optical interconnects, in which photons, rather than electrons, will pass signals from board to board, or chip to chip, or even from one part of a chip to another [see illustration, above].
The idea is simple in principle, and parallels telecommunications systems. An electrical signal from the processor would modulate a miniature laser beam, which would shine through the air or a waveguide to a photodetector, which would in turn pass the signal on to the electronics. Though at the moment it is more expensive to communicate with light than with electric current, the day is coming when only optical technologies will be able to keep up with the demands of ever-more-powerful microprocessors, just as they are now the only reasonable way to move the world's Internet traffic across the kilometers.
"We're already projecting that for certain system requirements data rates are going to be high enough and the link length long enough that we're going to have to use optics," says Modest Oprysko, senior manager of communications technologies at IBM Corp.'s Thomas J. Watson Research Center (Yorktown Heights, N.Y.).
A wire's bit rate is at the mercy of its parasitic resistance, capacitance, and inductance. At low frequencies, the series resistance and shunt capacitance of a circuit board trace dominate its behavior, determining the transition (rise and fall) times and thereby limiting its data rate. At higher frequencies, like those on circuit boards today, the wire's series inductance becomes more important than its resistance as an impeding factor, but with the same end result—a limit on the rate at which the trace can transmit pulses.
All these parasitic factors depend heavily on the geometry of the wire, especially its length. Resistance, for instance, is proportional to the wire's length and inversely proportional to its cross-sectional area. Because of this dependence on geometry, a simple wire's ultimate bit rate turns out to be proportional to its cross section, but falls with the square of its length. So thinner—and especially longer—means a lower bit rate. On a chip, the story has some caveats, but the conclusion is the same.
Transition-time limitations can be fought by driving the lines harder, but that's not a very good solution. It adds noise, increases power requirements, and aggravates already serious thermal management problems. Alternatively, the wires can be made fatter, but then you'll run out of space. Photons don't suffer from these limitations; their biggest problems are absorption and attenuation, neither of which is an issue over the distances inside a computer, or even across a room.
In telecommunications, transmission slows as it passes from the all-optical long-haul network to the lower-bandwidth metropolitan-area network, and finally crawls into the home along copper wires. Just as telecom companies want to increase total bandwidth by moving all-optical transmission closer to your house, the designers of optical interconnects want to get as much bandwidth as possible as close as possible to the microprocessor. Already, optics connect computer systems across distances of less than 300 meters, and backplane setups are in the works that will speed up transport of data from one board to another within a computer. Farther down the road are systems for increasing the bandwidth between two microprocessors, or among stacks of chips for massively parallel computing. All the pieces are in place—cheap lasers, sensitive detectors, and the methods needed to transmit from one to the other. Now it's just a question of when optical interconnects will perform well enough, and their production cost fall low enough, for them to replace copper wires.
Thinking inside the box
Many developers of optical interconnect schemes funnel the signal through some kind of waveguide. For instance, DaimlerChrysler Research (Ulm, Germany) is developing waveguide-based optical backplanes to connect computers in an airplane or to route signals in computers used in telecommunications [see figure, above]. As in most optical interconnect schemes, the photons are generated by vertical-cavity surface-emitting lasers (VCSELs) [see "Arrays of Light"]. Light passes through a lens, which expands the beam to a few millimeters in diameter. The expanded beam hits the waveguide entrance with greater certainty, while at the waveguide exit, it is redirected by a mirror through another lens, which focuses it on a detector. DaimlerChrysler claims the polymer waveguide is easier to integrate into a system than an optical fiber.
Prototypes with data rates of 1 Gb/s per channel across distances less than 100 cm were successfully tested last March. The company is providing development samples with channel rates of 2.5 Gb/s, and has systems with 10-Gb/s channels under development in the laboratory.
Another waveguide-based scheme belongs to two-year-old Primarion Corp. (Tempe, Ariz.). The company is in the early stages of making optical circuits that transmit data at 10 Gb/s across short distances. The goal is to bring fiber all the way to the processor. In its design, an electrical signal travels across a circuit board to a laser driver chip, which processes the signal and prepares to send it out. Connected to the laser driver is another module, containing an array of 12 VCSELs. The laser beams travel across optical fibers to a similar setup on another board, and there a photodetector passes the signal onto a receiver chip for reprocessing and conversion back into electricity.
John Burns, Primarion's vice president of technology development, sees compact optical I/O devices within the computer in just two to three years' time. These would combine the processing circuitry and the laser or receiver into a single package, with electrical contacts on the bottom and fiber-optic sockets on the side. Eventually, the company envisions having a printed optical board, like a printed-circuit board but embedded with polymer waveguides in place of copper wires. Then the signal-processing circuitry could sit right next to the device that needed the data, and the signal would be transmitted through the circuit board as light, minimizing the time data spends as electrons.
Fiber-based interconnects have already made their commercial debut, but not yet within the computer itself. In late 2000, Agilent Technologies (Palo Alto, Calif.) started selling an optical connector to link computers up to 300 meters apart. Developed with Anthony F. J. Levi, head of the Advanced Interconnect and Network Technology program at the University of Southern California (USC, Los Angeles), one version of the plug-in package can transmit data at an aggregate rate of 10 Gb/s. It contains four transmitters and receivers and connects via four optical fibers to a similar package. A 12-channel version operates at up to 40 Gb/s, but transmits in only one direction at a time. Other companies now offer similar products, for use in rack-to-rack connections among servers, in data storage centers, and in network and telecom switching.
Agilent's next aim, according to David Dolfi, manager of its optical interconnects and networks department, is to do something similar for a backplane within a computer. To keep up with faster processors and more complex systems, he says, the bandwidth of backplanes must increase by an order of magnitude, and that will require optical links. Barring some breakthrough in electrical links, Dolfi expects optical interconnects to move inside the box in three to five years.
Through the air in there
While the nearer-term, less complex interconnect schemes deliver light through a waveguide, engineers interested in high-performance computing are developing chip-to-chip optical communications through the air. So-called free-space interconnects could boost data throughput between chips by a factor of a thousand. This increase stems from the combination of the high data rate of optics and the fact that optical data channels can be much more densely packed than electrical ones. For one, the channels can be formed into two-dimensional arrays, rather than the one-dimensional packing of copper or optical fiber interconnects on a board. Secondly, the channels do not experience crosstalk when close together.
One such system in which three stacks of 16 chips apiece can talk to each other optically has been developed by Sadik Esener, a professor of electrical engineering at the University of California, San Diego, and his colleagues. A 16-by-16 array of VCSELs send a beam through the air, where integrated microlenses focus the beam and diffraction gratings redirect it. The result is a tight, 3-D array of highly interconnected chips for supercomputing and other applications [see figure, below].
Most researchers see such free-space interconnects as farther off in the future than those that use fiber to guide the light, in part because they require an accuracy of alignment much greater than that of plug-in cards in the average desktop. And anyone who has ever opened up a home computer and seen the dust built up inside knows another of the obstacles.
Nonetheless, free-space optics intrigues engineers who think about doing computing in revolutionary ways, and it has been an active research area for high-performance computing in North America, Japan, and especially Europe, which has had a longstanding effort. The appeal is simple. Say you wanted a supercomputer that could be optimized for multiple tasks. You set up the processors to work best with a given algorithm, perhaps for image processing, but when you want to switch to weather modeling, the architecture is no longer ideal. Using free-space optical interconnects, you could reconfigure the way processors talk to one another by redirecting the lasers to different detectors.
John Neff, director of the Optoelectronic Computing Systems Center at the University of Colorado (Boulder), is working on microelectromechanical systems (MEMS) that might be used to steer the beams. In Neff's experimental system, a microscopic mirror is attached to two metals with different thermal properties. Heat them up by running current through them, and one will stretch more than the other, bending it in the desired direction. It's a slow process, however, and the highest switching speed is about a kilohertz. But using electrostatic repulsion instead of heat to bend the mirrors produced speeds of 10 kHz, and Neff thinks he can get that up to 100 kHz.
Up for debate
The exact point at which the economics of moving data dictate optical interconnects is debatable. According to USC's Levi, when microprocessors reach speeds of 10 GHz, their inability to communicate quickly with computer memory or with other chips in a multiprocessor system will start to stifle their usefulness. "At that point, [it will be] increasingly difficult...for Intel to make useful systems out of those processors," Levi said.
Naturally, Intel Corp. is loath to sound the death knell for electrical interconnects quite yet. Says Wilfred Pinfold, technology director in its microprocessor research laboratory, "We still see a lot of opportunity to continue to move copper signaling forward."
For a start, engineers could rework the architecture of chips and boards to shorten the distances over which signals have to travel. Designers could add more pins to increase the number of I/O links, though not indefinitely. Intel can move data at 10 GHz over a copper wire on the board, and should be able to push that to at least 20 GHz. Pinfold says: "Where that peters out, we don't know." Still, his lab is striving for advances in both electrical and optical interconnects, as are IBM, Advanced Micro Devices, and other competitors.
Much of the research into optical interconnects in the U.S. has been funded by a US $70 million program run by the U.S. Defense Advanced Research Projects Agency (DARPA, Arlington, Va.). The massively parallel computing systems it has in view could find use in modeling nuclear reactions. But Ravindra Athale, who oversees the research, expects it to filter down to the consumer as well. The progression should be from expensive, intensive computer systems to simpler, cheaper ones, as well as from longer to shorter distances. Rack-to-rack connections are already here, board-to-board links seem likely in a few years, and chip-to-chip interconnects may happen in a decade or so.
As for optical connections between one system and another on a single chip, the view of most experts is dim. "It think that's beyond what's viable given today's technology," says USC's Levi. But finding out whether across-chip optical interconnects will ever be practical is one of the reasons for advanced research, says DARPA's Athale. "The answer is maybe, and that's final."
About the Author
NEIL SAVAGE a science and technology writer based in Lowell, Mass., earlier wrote a profile of the IEEE Medal of Honor winner, Herwig Kogelnik, in Spectrum's June issue.
To Probe Further
The June 2000 issue of Proceedings of the IEEE is dedicated almost exclusively to the subject of optical interconnects. It contains reports describing both free-space and waveguide-based systems developed in laboratories in North America, Japan, and Europe. In addition, an article by David A.B. Miller (F) details the rationale for moving from electrical to optical interconnects.
The Georgia Institute of Technology hosts the Interconnect Focus Research Center, a consortium of universities researching interconnects-related issues. Its Web site is at http://www.ifc.gatech.edu/.